Parksense® rear park assist — if equipped, Parksense® sensors, Parksense® rear park assist — if – Dodge 2015 Durango - Owner Manual User Manual

Page 230: Equipped

Advertising
background image

PARKSENSE® REAR PARK ASSIST — IF
EQUIPPED

The ParkSense® Rear Park Assist system provides visual

and audible indications of the distance between the rear

fascia and a detected obstacle when backing up, e.g.

during a parking maneuver. Refer to ParkSense® System

Usage Precautions for limitations of this system and

recommendations.
ParkSense® will retain the last system state (enabled or

disabled) from the last ignition cycle when the ignition is

changed to the ON/RUN position.
ParkSense® can be active only when the shift lever/gear

selector is in REVERSE. If ParkSense® is enabled at this

shift lever/gear selector position, the system will remain

active until the vehicle speed is increased to approxi-

mately 7 mph (11 km/h) or above. When in REVERSE

and above the system’s operating speed, a warning will

appear within the Driver Information Display (DID)

indicating the vehicle speed is too fast. The system will

become active again if the vehicle speed is decreased to

speeds less than approximately 6 mph (9 km/h).

ParkSense® Sensors

The four ParkSense® sensors, located in the rear fascia/

bumper, monitor the area behind the vehicle that is

within the sensors’ field of view. The sensors can detect

obstacles from approximately 12 in (30 cm) up to 79 in

(200 cm) from the rear fascia/bumper in the horizontal

direction, depending on the location, type and orienta-

tion of the obstacle.

228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising