Body lubrication – Dodge 2015 Durango - Owner Manual User Manual

Page 603

Advertising
background image

6. Remove the A/C air filter by pulling it straight out of

the housing.

7. Install the A/C air filter with the arrow on the filter

pointing toward the floor. When installing the filter

cover, make sure the retaining tabs fully engage the

cover.

CAUTION!

The A/C air filter is identified with an arrow to
indicate airflow direction through the filter. Failure
to properly install the filter will result in the need to
replace it more often.

8. Reinstall the glove compartment door on the glove

compartment door hinge and reattach the glove com-

partment tension tether by inserting the tether clip in

the glove compartment and sliding the clip away from

the face of the glove compartment door.

9. Push the door to the near closed position to reengage

the glove compartment travel stops.

NOTE:

Ensure the glove compartment door hinges and

glove compartment travel stops are fully engaged.

Body Lubrication

Locks and all body pivot points, including such items as

seat tracks, door hinge pivot points and rollers, liftgate,

tailgate, decklid, sliding doors and hood hinges, should

be lubricated periodically with a lithium based grease,

such as MOPAR® Spray White Lube to assure quiet, easy

operation and to protect against rust and wear. Prior to

the application of any lubricant, the parts concerned

should be wiped clean to remove dust and grit; after

lubricating excess oil and grease should be removed.

Particular attention should also be given to hood latching

components to ensure proper function. When performing

other underhood services, the hood latch, release mecha-

nism and safety catch should be cleaned and lubricated.

7

MAINTAINING YOUR VEHICLE 601

Advertising