Vehicle security alarm — if equipped, To arm the system – Dodge 2015 Durango - Owner Manual User Manual

Page 21

Advertising
background image

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the

user’s authority to operate the equipment.

VEHICLE SECURITY ALARM — IF EQUIPPED

This Vehicle Security Alarm monitors the vehicle doors,

liftgate, and ignition for unauthorized operation. When

the alarm is activated, the interior switches for door locks

and power liftgate are disabled. The Vehicle Security

Alarm provides both audio and visual signals, the horn

will sound, the headlights will turn on, park lamps,

and/or turn signals will flash repeatedly for three min-

utes. If the disturbance is still present (driver’s door,

passenger door, other doors, ignition) after three minutes,

the headlights, park lamps, and/or turn signals will flash

for an additional 15 minutes.

NOTE:

The Panic and Security alarms are quite different.

Please take a moment to activate the Panic and the

Security modes to hear the differences in the horn. In case

one should go off in the future, you will need to know

which mode has been activated in order to deactivate it.

To Arm The System

Follow these steps to arm the Vehicle Security Alarm:
1. Make sure the vehicles ignition is cycled to the “OFF”

position (refer to ЉStarting ProceduresЉ in ЉStarting

And OperatingЉ for further information).

• For vehicles equipped with Keyless Enter-N-Go™,

make sure the vehicle ignition system is OFF.

• For vehicles not equipped with Keyless Enter-N-

Go™, make sure the vehicle ignition system is OFF,

and the key is physically removed from the ignition.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19

Advertising