Front turn signal, Front fog lamps – Dodge 2015 Durango - Owner Manual User Manual

Page 640

Advertising
background image

9. Install the access cap in the wheel liner and rotate

clockwise to lock it in place.

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.

Front Turn Signal

1. Open the hood.
2. Turn the turn signal bulb one–quarter turn counter-

clockwise to remove from housing.

3. Disconnect the electrical connector and replace the

bulb.

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.

Front Fog Lamps

1. Reach through the cutout in the splash shield and

rotate the bulb’s electrical connector one-quarter turn

counterclockwise and remove it from the fog lamp

housing.

2. Remove the bulb from the connector and install the

replacement bulb.

3. Install the bulb and connector assembly into the fog

lamp housing and rotate the connector one-quarter

turn clockwise to lock it in place.

638 MAINTAINING YOUR VEHICLE

Advertising