Trailer hitch receiver cover removal — if equipped, Trailer hitch receiver cover removal — if, Equipped – Dodge 2015 Durango - Owner Manual User Manual

Page 528

Advertising
background image

NOTE:

• The trailer tongue weight must be considered as part of

the combined weight of occupants and cargo, and

should never exceed the weight referenced on the Tire

and Loading Information placard. Refer to “Tire Safety

Information” in “Starting and Operating” for further

information. The addition of passengers and cargo may

require reducing trailer tongue load and Gross Trailer

Weight (GTW). Redistributing cargo (to the trailer) may

be necessary to avoid exceeding Rear Gross Axle Weight

Rating (GAWR) of 3,900 lbs (1 769 kg).

• Vehicles not factory equipped with trailer tow package

are limited to 3,500 lbs (350 lbs tongue weight).

Trailer Hitch Receiver Cover Removal — If
Equipped

Your vehicle may be equipped with a trailer hitch re-

ceiver cover, this must be removed to access the trailer

hitch receiver (if equipped). This cover is located at the

bottom center of the rear fascia.
1. Turn the two locking retainers located at the bottom of

the hitch receiver cover a 1/4 turn counterclockwise

and pull bottom of the hitch receiver cover outward

(towards you).

526 STARTING AND OPERATING

Advertising