Canon PIXMA MP830 - Manual (Page 108)

106 Chapter 5 Faxing
3
Print the User’s data list.
(1) Use [ ] or [ ] to select <User’s data list>, then press [OK].
(2) Use [ ] or [ ] to select <Yes>, then press [OK].
The User's data list is printed.
„ TX Report
Your machine can print a TX (transmission) report after sending a document. You can set the
machine to print every time it sends a document, or only when an error occurs. Alternatively, you
can disable printing of the report.
„ RX Report
Your machine can print an RX (reception) report after receiving a document. You can set the
machine to print every time it receives a document, or only when an error occurs. Alternatively,
you can disable printing of the report.
Sending Faxes
„ Documents You Can Fax
For information on the types of documents you can fax, their requirements, and details on
loading them, see
“Loading Documents to Copy, Fax, or Scan” on page 19 .
„ Before Sending Faxes
The machine enables you to adjust the resolution and scan contrast to suit the type of document.
Note
z For details on the TX report setting, see “TX report” on page 139 .
z The default setting is <Print error only>.
Note
z For details on the RX report setting, see “RX report” on page 140 .
z The default setting is <Do not print>.
(1)
(2)