Canon PIXMA MP830 - Manual (Page 80)

78 Chapter 4 Printing Photographs Directly from a Compliant Device
4
Specify the number of copies, select [Print], and then press [SET] on the digital
camera.
Note
z By operating the digital camera, you can make the following prints:
– You can make a standard print from the image displayed in the single display mode or in
the index display mode.
– You can print specified numbers of images, or make an index print by editing the DPOF.
* Images other than Exif may not be index printed.
– For the images taken with an ExifPrint compatible digital camera, the ExifPrint function
can be used.
– If date printing is set from the digital camera, the date when the photograph was taken is
to be printed (excluding the index print).
– Images will be scaled automatically according to the image size set on the digital camera
and the size of the media set on the machine.
z The digital camera does not support the following functions:
– Print quality setting
– Machine maintenance
z To disconnect the USB cable connecting the digital camera to the machine, follow the
procedure below:
1. Disconnect the USB cable from the machine.
2. Turn OFF the digital camera.
3. Disconnect the USB cable from the digital camera.
When disconnecting the USB cable, be sure to hold the connector by its sides.