Canon PIXMA MP830 - Manual (Page 16)

14 Chapter 1 Before Printing
„ Rear View and Interior
(19) Print Head Lock Lever
Used to fix the Print Head.
(20) Ink Tank Lamp
Lights or flashes red to indicate the status of the ink tank. You can check the status of
each ink tank according to the way its lamp flashes. See
“Ink Tank Lamps” on page 15 .
(21) Print Head Holder
Used to install a Print Head.
(22) Scanning Unit (Printer Cover)
This is the unit used to scan documents. Open when replacing the ink tanks or clearing
jammed paper.
(23) Inner Cover
Open this cover when replacing the ink tanks.
(24) Card Slot
Set the memory card here. For details, see “Inserting the Memory Card” on page 54 .
(25) Access Lamp
Lights when a memory card is inserted into the Card Slot. This lamp flashes while the
machine is reading or writing data from/to the memory card. For details, see
“Inserting
the Memory Card” on page 54 .
Important
Do not pull up this lever after installing the Print Head.
(22)
(19) (20) (21) (23) (24) (25)
(27)
(26)
(28) (29)
(31)
(30)