Canon PIXMA MP830 - Manual (Page 138)

136 Chapter 9 Changing the Machine Settings
„ Two-sided output setting
Sets the paper output setting for double-sided documents.
Fax Settings
Before changing any settings, you can print the User's data list to check the current settings
of your machine. For details, see “Printing the User’s Data List” on page 105 .
„ Receive mode settings
z FAX/TEL auto switch
Sets the receive mode to <FAX/TEL auto switch>.
z FAX only
Sets the receive mode to <FAX only>.
z Manual RX
Sets the receive mode to <Manual RX>.
z Ans. machine connect.
Sets the receive mode to <Ans. machine connect.>.
z DRPD
Sets the receive mode to <DRPD>. This setting is only available in US and Canada.
z Network switch
Sets the receive mode to <Network switch>.
„ Memory reference
z Print memory list
Lists the documents currently stored in the machine’s memory.
z Print specified document
Prints the specified document stored in the machine’s memory.
Important
z This function only works when both paper sources are loaded with paper of the same size
and type.
z When printing from a computer, you need to set this feature with the printer driver. For
details, refer to the Printer Driver Guide.
z When printing from a computer, this feature can be used only when both paper sources are
loaded with paper other than Credit Card- or Legal-sized paper.
z In Copy mode or Memory card mode, this feature can be used only when both paper
sources are loaded with paper other than Credit Card- or Legal-sized paper.
z In Fax mode, this feature can be used only when both paper sources are loaded with A4-
or Letter-sized plain paper.