Canon PIXMA MP830 - Manual (Page 137)

Chapter 9 135 Changing the Machine Settings
(2) Use [ ] or [ ] to select the menu, then press [OK].
Example: select <Extended copy amount>.
5
Change the settings.
(1) Use [ ] or [ ] to select the setting item, then press [OK].
Example: select <Small>.
The Print Settings
„ Quiet mode
Use this function if you want to reduce the operation noise, such as when printing at night.
„ Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
„ Extended copy amount
Selects the amount of image that extends off the paper when printing in Borderless (full).
„ Auto cont. feed switch
If paper runs out in one paper source, paper will be fed from the other.
Important
z The printing speed may be reduced compared to when this setting is set to <OFF>.
z This function may not be so effective depending on the print quality setting.
z Furthermore, certain noise, such as when the machine is preparing for printing, is not
reduced.
Important
Be sure to revert this setting to <OFF> after printing since it may result in lower print quality.
Note
z This setting can be applied only when Copy mode selected.
z If you set <Large> for this function, the area of the image extending off the paper becomes
larger.
(2)
(1)