CREATIVE Network Blaster Wireless Access Point Router CW2202 - Manual (Page 27)

Configuring Basic Settings 4-9
PPPoE connection If you connect to the Internet using a DSL Modem, and the use of your account
requires entering a login name and password, select the PPPoE option in the
Protocol field.
After you have
updated the various
settings, make sure
you click the Apply
button for changes to
take effect.
Figure 4-3
Click this link to
view this page.
Always On option
Allows a PPP session to be
kept online continously.
Max Idle Time
Determines the time before
automatic disconnection
during inactivity.
Manual Connect option
Allows an instant connection by clicking the
Connect button. Click the Disconnect
button to terminate the session.
Connect on Demand
option
Allows any client PC
requesting for connection to
dial the ISP automatically
through the AP router. To end
the session manually, click
the Disconnect button.
User Name/Password
Type the Username and
Password given by your ISP.
Select NAT Routing or
Bridging to configure your
computer network.