CREATIVE Network Blaster Wireless Access Point Router CW2202 - Manual (Page 36)

Configuring Advanced Settings 5-2
Configuring
Wireless MAC
Address Access
Control If you want to customize security settings, go to the Access Control section shown
in Figure 5-2. By controlling MAC address access, you can determine which
wireless clients have access to your wireless LAN. Refer to Figure 5-2 to learn more
about configuring these settings.
Network devices, such
as USB adapters,
PCMCIA cards, DSL
modems and PCI
ethernet cards, have
labels displaying a
MAC address.
MAC Address Access Control
Enter the MAC address of the
network devices that you want
to allow access to your Wireless
AP Router in the Allow List
boxes.
Click this link to
view this page.
Figure 5-2