Bridge, Broadband, Bss (basic service set) – CREATIVE Network Blaster Wireless Access Point Router CW2202 User Manual

Page 55: Channel, Client, Dbm (decibels per milliwatt), Dhcp (dynamic host configuration protocol), Digital, Dns (domain name system)

Advertising
background image

Glossary E-2

Bridge

A hardware device that links two or more physical networks and manages the

transfer of data between these networks. The two networks connected can be alike

or dissimilar.

Broadband

A transmission media that can handle the transmission of multiple messages at

different frequencies, at one time. Broadband signals use analog carriers.

BSS (Basic Service
Set)

A group of wireless clients and an AP using the same ID (SSID).

Channel

A channel is a separate path through which signals can flow.

Client

A program or computer that is connected to a wired or wireless network.

dBm (Decibels Per
Milliwatt)

A unit of measurement used to express relative difference in power or intensity,

relative to 1 mW.

DHCP (Dynamic
Host Configuration
Protocol)

A method of assigning a temporary IP address to a host, such as a computer,

connected on a specific network. With dynamic addressing, a particular host may

have a different IP address each time it connects to the network.

Digital

Data expressed as a string of 0s and 1s. Each of these digits is referred to as a bit

(and a string of 8 bits that a computer can address individually as a group is a

byte).

DNS (Domain
Name System)

This allows you to specify a symbolic name, a meaningful and easy-to-remember

“handle”, instead of an IP address. The DNS is the way that Internet domain

names are located and translated into IP addresses.

Advertising