CREATIVE Network Blaster Wireless Access Point Router CW2202 - Manual (Page 40)

Configuring Advanced Settings 5-6
Upgrading
Firmware If you want to upgrade the firmware settings of your Wireless AP Router, go to the
Firmware Upgrade section. Current firmware and bootcode versions are also
shown here. Refer to Figure 5-6 to learn more about configuring these settings.
Do not turn off your
Wireless AP Router
when upgrading the
firmware.
Figure 5-6
Locate New Firmware
Lets you locate and upgrade to
new firmware. Click the Browse
button to locate and select your
firmware, and click the Upgrade
button.
Click the
Administrator link
and then the
Firmware Upgrade
link to view this page.