CREATIVE Network Blaster Wireless Access Point Router CW2202 - Manual (Page 35)

Configuring Advanced Settings 5-1
Configuring Advanced Settings
Configuring LAN
settings The Local Area Network (LAN) page is where you configure the LAN settings of
your Wireless AP Router. Refer to Figure 5-1 to learn more about configuring these
settings.
Figure 5-1
Click this link to view
this page.
DHCP Server
Lets you enable or disable
your Wireless AP Router
DHCP server.
IP Pool Range
Specifies the range of IP addresses
that can be assigned to clients when
you enable your Wireless AP Router
DHCP server.
DHCP Lease Time
Lets you set the usage
duration of an IP address
that can be reserved for a
client when you enable
your Wireless AP Router
DHCP server.