CREATIVE Network Blaster Wireless Access Point Router CW2202 - Manual (Page 42)

Configuring Advanced Settings 5-8
Resetting the
Wireless AP
Router To reset your Wireless AP Router to its factory defaults, use a straightened
paperclip to press the RESET button while turning your Wireless AP Router off and
then on again. Keep the RESET button depressed throughout. Continue pressing
the RESET button for another 10 or more seconds before releasing it.
Resetting your
Wireless AP Router will
erase all of your
configured settings
(LAN, wireless LAN,
WEP, etc.) and replace
them with the factory
defaults. Do not reset
your Wireless AP
Router if you want to
retain your settings.
You can also reset your
Wireless AP Router
with your web browser.
Refer to "Restoring or
saving a profile" on
page 5-7 for details.
Figure 5-8