Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 110)

CSX400 Configuration with QuickSET
96 CSX400 and CSX400-DC User’s Guide
Once the Wide Area Frame Relay Time Slot configuration is complete, click on the Next>> button,
and go to the
Bridging and Routing Configuration section.
Wide Area PPP Time Slot Configuration Window
The Wide Area PPP Time Slot configuration window shown in Figure 34 displays when you click
on the Next>> button in the Wide Area T1, E1, and DI configuration windows when PPP is chosen
as the WAN Protocol.
Figure 34 Wide Area PPP Time Slot Configuration Window
NOTE
If you are configuring a WPIM-DI Time Slot table, any available Time Slots that are not
checked are mapped to the DI Interface. In other words, If you lease an entire T1 line,
any Time Slots that are not selected in the Frame Relay configuration window are
used by the device connected to the DI interface.