Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 77)

Installation
CSX400 and CSX400-DC User’s Guide 63
Figure 14 CSX-COMP/ENCR
Installing the CSX400
The CSX400 may be installed on a tabletop, shelf or in a 19-inch rack.
Refer to Tabletop and Shelf Installations for information concerning a tabletop or shelf
installation. CSX400 and CSX400-DC Rackmount Installation describes the rackmount
installation.
Tabletop and Shelf Installations
The following two subsections provide guidelines for installation on a tabletop or shelf.
To install the CSX400 on a tabletop or shelf, locate the CSX400 within seven feet of its power
source with an unrestricted free surface area as shown in
Figure 15 , and complete the following
steps:
1. Locate the six round rubber feet included with your CSX400.
!
CAUTION
Before performing installation procedures, ensure that the requirements outlined in the
section,
Guidelines for Installations , are met.
Standoff Screws
Standoff
D-Type
Connector
CSX-COMP/ENCR
D-Type
Connector Pins
Detail
2204N01