Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 99)

CSX400 Configuration with QuickSET
CSX400 and CSX400-DC User’s Guide 85
Once the E1 WAN configuration is complete, click on the Next>> button and go to the Wide Area
Frame Relay Time Slot Configuration Window or Wide Area PPP Time Slot Configuration
Window section, depending on which protocol you are using.
Wide Area DI Configuration Window
The Wide Area (DI) configuration window shown in Figure 29 displays after clicking on the
Next>> button in the Ethernet 1 and 2 configuration window or the Wide Area Frame Relay Time
Slot and PPP configuration windows, depending on whether you have installed one or two WPIMs
in the CSX400, and in what order you are configuring them.
This section explains how to configure the CSX400 Wide Area DI interface using QuickSET.
Figure 29 Wide Area DI Configuration Window
NOTE
The service provider (i.e., AT&T, Sprint, MCI, etc.) determines the settings for the
following fields. Consult the service provider for the correct settings.