Sliding rails rack kit contents – Dell POWEREDGE 1950 User Manual
Page 10
8
Four-Post Rack Installation
Sliding Rails Rack Kit Contents
•
One pair of slide assemblies (convertible to RapidRails or VersaRails configuration)
•
One cable-management arm
•
One tray
•
One status indicator cable (if applicable)
•
Tie wraps to secure the cables to the cable management arm
•
Eight 10-32 x 0.5-inch flange-head Phillips screws (used in VersaRails configuration only)
NOTE:
The nonmetric screws described in illustrations and in procedural steps are identified by size and number
of threads per inch. For example, a #10 Phillips-head screw with 32 threads per inch is identified as a 10-32 screw.
Figure 1-1.
Sliding Rails Rack Kit Contents
1
tray
2
slide assemblies (2)
3
10-32 x 0.5-inch flange-head Phillips
screws (8) (VersaRails configuration only)
4
tie wraps
5
status indicator cable
(if applicable)
6
cable-management arm
1
2
3
5
6
4