Canon Elura40 - Manual (Page 108)

108
E
Using a Memor
y Car
d
Record an image from a tape onto a memory card as still images. To
automatically record multiple still images from a tape to a memory card, refer to
“Copying Still Images from Tape to Memory Card”(
137)
• The still image’s data code will reflect the date and time it has been recorded to
the memory card.
• The image size of a still image recorded from tape onto a memory card will be
640
× 480.
1. Play back the tape.
2. When the image you want to record appears in the still display,
press the PHOTO button halfway down and hold it.
• The tape is set to playback pause mode and the number of images that can
still be recorded on the memory card appears in the display.
3. Press the PHOTO button fully down to record the still image to the
memory card.
• The card access indicator flashes.
Notes:
• You can also set the tape to playback pause mode in step 1 and record the
image with only 1 full press of the PHOTO button.
• If you record an image onto a memory card that was originally recorded in the
16:9 mode for wide screen TV’s, the image will appear to be vertically
“squashed” (compressed).
• The shutter sound doesn’t sound in TAPE PLAY (VCR) mode.
Tape
+ PLAY
(VCR)
TAPE
Recording Still Images from a Tape
3
2
1
Memory card
Press the PHOTO
button fully down