Canon Elura40 - Manual (Page 80)

80
E
Using the Full
Rang
e of Features
DATA
CODE
During TAPE PLAY (VCR) mode, the data code can be displayed or hidden while
the camcorder is in play, slow or still mode.
Camcorder data may be displayed as “– – –” during fast forward, rewind, reverse
playback, forward and reverse
×2 playback.
Press the DATA CODE button. When using a cassette, press it while
the camcorder is in play, slow or still mode.
• Press it once to display, once more to hide it.
A data code, containing the date and time the recording was made and other
camcorder data (shutter speed and exposure settings) is automatically recorded on
a special data section of the tape.
• Only the date and time appear in the data code when using a memory card.
Displaying Date, Time and Camcorder Data (Data Code)
To change the date and time combination, open the menu and select
DISP.SET UP. Then select D/TIME SEL., set it to DATE, TIME or
DATE & TIME and close the menu.
Selecting date/time
Select whether you want the date, the time, or both to show up on your data code
display.
D/TIME SEL.•DATE & TIME DISP.SET UP
( 39)
+ , + PLAY
(VCR)
CARD
PLAY
(VCR)
TAPE