Canon Elura40 - Manual (Page 121)

121
E
Using a Memor
y Car
d
1. With an image in the display, press the SET button to open the
FILE OPER. menu.
• PROTECT , PRINT MARK , and IMAGE ERASE settings appear.
• If you select
|RETURN, the menu disappears from the display.
2. Select PROTECT and press the SET button.
• The protect mark appears on the image.
• Now you are unable to erase this image.
• Press the SET button again to cancel it.
• If you select
|RETURN, the menu disappears from the display.
• To cancel image protection, select PROTECT and press the SET
button. disappears and now you can erase this still image/movie.
2. Select PRINT MARK , set the number of prints with the
selector dial and press the SET button.
• The print mark appears on the still image.
• If you select
|RETURN, the menu disappears from the display.
• To cancel a print mark, select PRINT MARK ,set the number of prints to
0 (Zero) with the selector dial and press the SET button. disappears.
2. Select IMAGE ERASE and press the SET button.
• ERASE THIS IMAGE? NO YES appears in the display.
• If you select
|RETURN, the menu disappears from the display.
3. Select YES and press the SET button.
• The still image/movie is erased.
• One still image/movie before the erased still image/movie appears.
To erase a still image/movie
To mark a still image for printing (Print Mark)
To protect a still image/movie
+ PLAY
(VCR)
CARD
File Operation (FILE OPER.)