Canon Elura40 - Manual (Page 65)

65
E
Using the Full Rang
e of Features
Digital effects can be set with the controls on the body of the camcorder or the
wireless controller.
SET
D.EFFECTS ON/OFF
MENU
Operating faders
Sound and image fade together.
When operating faders in TAPE CAMERA mode, make sure the program selector
is set to
Q.
1. Press the D.EFFECTS SELECT button to open the digital effects
menu.
• D.EFFECT
|, FADER, EFFECT and MULTI-S appear.
2. Select FADER.
• The settings appear. Select the setting by turning the selector dial.
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the D.EFFECTS SELECT button to close the menu.
• The name of your selected fader flashes in the display.
5. Press the D.EFFECTS ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the D.EFFECTS ON/OFF button, the chosen fader is
activated (display lights continuously) or deactivated (display flashes).
6. If you’re in TAPE CAMERA mode:
Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
If you’re in TAPE PLAY (VCR) mode:
Fade in- Press the e (play) button.
Fade out- Press the
a
(pause) button.
Fader on/off
Select fader
+ , + PLAY
(VCR)
TAPE CAMERA TAPE