Canon Elura40 - Manual (Page 99)

99
E
Editing
When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
+
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UP. Then select OUTPUT CH,
set it to the desired setting and close the menu.
• Refer to the following list.
PLAY
(VCR)
TAPE
Selecting audio output channels
OUTPUT CH•••L/R VCR SET UP
( 39)
OUTPUT CH setting
Tape recorded with
stereo sound
Playback sound
L+R channels main + sub L/R
L/L L channel only main only
R/R R channel only sub only
Tape recorded on
multiple channels