Canon GALVANO GC-251 - Manual (Page 33)

CANON Digital Galvano Scanner System KP-1SM Series + GC-251
Users Manual 1.00
33
Starting origin detection
Servo ON/OFF Start or stop servo control.
High-speed serial
communication
selection
Select the high-speed serial communication command or internal
command for position specification. (For details, see Chapter 4.)
(Start = High-speed serial communication, OFF = Internal
command)
Tab selection
The screen of each function can be displayed by tab selection.
(A detailed explanation of the screen is shown when each function
is displayed.)
Control display
This area displays the screen of each function selected by a tab at
.
Status display The controller status of two axes is displayed.
Soft reset Press this button for soft reset.
Command input
screen
Allows direct command input.
DSP version
The version of the controller software is displayed.
During troubleshooting, the support staff may ask for the version
number.