Dell Precision T7600 (Mid 2012) - Manual (Page 32)

Installing the Power Switch
1. Connect the power switch cable to the system board.
2. Route the power switch module through the opening on the front panel.
3. Press the retention tab to secure the power switch in place.
4. Install the front cover.
5. Follow the procedures in After Working Inside Your Computer .
Removing the Speaker
1. Follow the procedures in Before Working Inside Your Computer .
2. Disconnect the speaker cable from the system board and unroute it from the securing clip on the chassis.
3. Press the speaker latch on both sides to release the speaker from the chassis and remove it from the computer.
32