Dell Precision T7600 (Mid 2012) - Manual (Page 49)

Table 3. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated
network controller. The options are:
• Disabled
• Enabled (Default Setting)
Integrated NIC 2 Allows you to configure the second integrated
network controller. The options are:
• Disabled
• Enabled (Default Setting)
USB Controller Allows you to control the USB controller. The
options are:
• Enable USB Controller (Default
Setting)
• Disable USB Mass Storage Dev
• Disable USB Controller
Serial Port Identifies and defines the serial port settings.
You can set the serial port to:
• Disabled
• Auto
• COM1 (Default Setting)
• COM2
• COM3
• COM4
NOTE: The operating system may allocate
resources even if the setting is disabled.
SATA Operation Allows you to configure the internal SATA
hard-drive controller. The options are:
• Disabled
• ATA
• AHCI (Default Setting)
NOTE: SATA is configured to support
RAID mode.
USB Configuration Allows you to define the USB configuration.
The options are:
• Enable Boot Support/Front USB Ports/
Rear USB Ports/USB3 Ports
SMART Reporting This field controls if the hard drive errors for
the integrated drives are reported during
system startup. This technology is part of the
49