Dell Precision T7600 (Mid 2012) - Manual (Page 53)

Option Description
• Disabled (Default Setting) — Does not allow the system to power on by
special LAN signals when it receives a wake-up signal from the LAN or
wireless LAN.
• LAN Only — Allows the system to be powered on by special LAN signals.
This option is Disabled by default.
Table 8. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This
option is not set by default.
SERR Messages Controls the SERR message mechanism. This option is not set by default. Some
graphics cards require that the SERR message mechanism be disabled.
Table 9. POST Behavior
Option Description
Numlock LED Specifies if the NumLock function can be enabled when the system boots. This
option is enabled by default.
Keyboard Errors Specifies whether keyboard related errors are reported when it boots. This option
is enabled by default.
POST Hotkeys Specifies whether the sign-on screen displays a message, that displays the
keystroke sequence required to enter the BIOS Boot Option Menu.
• Enable F12 Boot Option menu - This option is enabled by default.
Table 10. System Logs
Option Description
BIOS events Displays the system event log and allows you to clear the log.
• Clear Log
Updating the BIOS
It is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. For
notebooks, ensure that your computer battery is fully charged and connected to a power outlet
1. Restart the computer.
2. Go to support.dell.com/support/downloads.
3. If you have your computer's Service Tag or Express Service Code:
NOTE: For desktops, the service tag label is available on the front of your computer.
NOTE: For notebooks, the service tag label is available on the bottom of your computer.
NOTE: For All-In-One Desktops, the service tag label is available at the back of your computer.
53