Dell Precision T7600 (Mid 2012) - Manual (Page 43)

Installing the System Board
1. Align the system board to the port connectors on the rear of the chassis and place the system board in the chassis.
2. Tighten the screws that secure the system board to the chassis.
3. Connect the connectors to the system board.
4. Install the:
a) processor
b) memory module(s)
c) PCI card
d) coin-cell battery
e) chassis intrusion switch
f) hard drive
g) front cover
h) system fan
i) heat sink
j) air tunnel
k) optical drive
l) left cover
5. Follow the procedures in After Working Inside Your Computer .
System Board Components
The following image displays the system board components .
43