Dell PowerVault MD3820f - Manual (Page 167)

Changing The Modification Priority Of An Overall Repository Virtual Disk
Use the Modification Priority option to specify the modification priority setting for an overall repository
virtual disk on a storage array.
You can change the modification priority for an overall repository for the following storage objects:
• Snapshot group
• Snapshot virtual disk
• Consistency group member virtual disk
• Replicated Pair
NOTE: Changing the modification priority by using this option modifies the priority only for the
overall repository that you selected. The settings are applied to all individual repository virtual disks
contained within the overall repository.
To change the modification priority:
1. In the AMW, select the Storage & Copy Services tab.
2. Select the storage object for which to change the modification priority.
3. Right click the selected storage object and select Overall Repository → Change Modification
Priority.
The Change Disk Pool Settings window is displayed.
4. In the Select modification priority area, move the slider bar to select a priority level.
5. Click OK.
Changing The Media Scan Setting Of An Overall Repository Virtual Disk
Use the Change Media Scan Settings option to set the media scan settings for an overall repository
virtual disk on a storage array.
You can change the media scan settings for an overall repository for the following storage objects:
• Snapshot group
• Snapshot virtual disk
• Consistency group member virtual disk
• Replicated pair
The following guidelines apply:
• Changing the media scan settings by using this option modifies the settings only for the overall
repository that you selected.
• The settings are applied to all individual repository virtual disks contained within the overall repository.
To change the media scan settings:
1. In the AMW, select the Storage & Copy Services tab and select any virtual disk.
2. Select the storage object for which to change the media scan settings.
3. Right click the selected storage object and select Overall Repository → Change Media Scan
Settings.
The Change Media Scan Settings window is displayed.
4. Select Enable media scan.
167