Dell PowerVault MD3820f - Manual (Page 241)

Starting The SMagent Software In Linux
To start or restart the Host Context Agent software in Linux, enter the following command at the prompt:
SMagent start
The SMagent software may take a little time to initialize. The cursor is shown, but the terminal window
does not respond. When the program starts, the following message is displayed:
SMagent started.
After the program completes the startup process, text similar to the following, is displayed:
Modular Disk Storage Manager Agent, Version 90.02.A6.14
Copyright (C) 2009-2010 Dell, Inc. All rights reserved.
Checking device <n/a> (/dev/sg10): Activating
Checking device /dev/sdb (/dev/sg11): Skipping
Checking device <n/a> (/dev/sg3): Activating
Checking device <n/a> (/dev/sg4): Activating
Checking device <n/a> (/dev/sg5): Activating
Checking device <n/a> (/dev/sg6): Activating
Checking device <n/a> (/dev/sg7): Activating
Checking device <n/a> (/dev/sg8): Activating
Checking device <n/a> (/dev/sg9): Activating
241