Dell 1600n Multifunction Mono Laser Printer - Manual (Page 28)

1 8 U n d e r s t a n d i n g t h e S o f t w a r e
www
.dell.com/supplies | support.dell.com
5 Click Finish, and a second hardware wizard appears. The printer driver is
automatically loaded from D:\1600n\Printer\GDI\WinXP\delr1.inf, where “D” is your
CD drive.
6 Click Next, and then click Finish.
Windows 2000:
1 Make sure that the multi-function printer is connected to your computer and powered
on.
2 When the hardware wizard screen appears, insert the Drivers and Utilities CD and
click Next.
NOTE: For each wizard that appears, select Search for a suitable driver for my device
(Recommended), click Next, select CD-ROM Drives, and then click Next through the
wizard screens.
3 The scanner driver is automatically loaded first from
D:\1600n\Scan\WINXP2K\p3scan.inf, where “D” is your CD drive.
4 Click Next.
5 Click Finish, and a second hardware wizard appears. The printer driver is
automatically loaded from D:\ delr1.inf, where “D” is your CD drive.
6 Click Next, and then click Finish.
Windows 98SE:
1 Make sure that the multi-function printer is connected to your computer and powered
on.
2 When the hardware wizard screen appears, insert the Drivers and Utilities CD and
click Next.
3 Select Search for the best driver for your device (Recommended), and click Next.
4 Select Specify a Location, and then click Browse.
5 Select D:\USB, where “D” is your CD drive.
6 Click OK, and then click Next three times. The driver installs.
7 Click Finish, and a second wizard appears.
8 If the CD menu screen appears above the wizard, click Add New Hardware Wizard
from the Windows taskbar.
9 Click Next. Search for the best driver for your device (Recommended) is selected.
10 Click Next. D:\USB is selected.