Dell 1600n Multifunction Mono Laser Printer - Manual (Page 29)

U n d e r s t a n d i n g t h e S o f t w a r e 1 9
11 Click Next two times. The driver installs.
12 Click Finish, and a third hardware wizard appears.
13 Click Next. Search for the best driver for your device (Recommended) is selected.
14 Click Next, click Browse, select the location D:\1600n\Scan\WIN98ME, and click
OK.
15 Click Next two times. The driver installs.
16 Click Finish.
Windows Me:
1 Make sure that the multi-function printer is connected to your computer and powered
on. When the hardware wizard screen appears, Automatic search for a better driver for
your device (Recommended) is selected.
2 Insert the Drivers and Utilities CD and click Next. The driver installs.
3 Click Finish, and a second wizard appears.
4 If the CD menu screen appears above the wizard, click New Hardware Wizard from
the Windows taskbar.
5 Click Next. Automatic search for a better driver for your device (Recommended) is
selected.
6 Click Next. The driver installs.
7 Click Finish.
If the CD software installation menu does not appear, follow these instructions:
1 Click Start → Run → Browse to D: (where “D” is your CD drive).
2 Select Setup, click Open, and then click OK.
3 Click Personal Installation.
4 Click Typical or Custom Installation. (If you choose Custom Installation, select from
the available software options and click Next.)
5 After installation, you may click Print Test Page.
6 Click Finish.