Dell 1600n Multifunction Mono Laser Printer - Manual (Page 59)

U s i n g Yo u r M u l t i - Fu n c t i o n Pr i n t e r 4 9
Fax Menu Options
1 Press <Menu> to display the menu features.
2 Press the scroll button ( or ) to move the desired setting
3 Press <Select> to select the displayed setting.
Fax Setup
• Receive Mode : Select the default fax receiving mode.
• Fax mode: The fax machine answers an incoming call and automatically enters
receive mode. The ring count required to enter receive mode is set in the System
Data. If the fax machine memory is full, the receive mode is automatically
changed to Tel mode.
• Tel mode: The fax machine only answers the call if the extension phone is picked
up and the remote receive code is pressed, or if <On Hook Dial> pressed and
then the <Send Fax> button is pressed when fax tones are heard.
• Ans/Fax mode: Share one phone line with Telephone Answering Device (TAD).
The TAD picks up the line but the fax machine automatically monitors and takes
the phone line if fax tones are received.
• DRPD mode: Use one telephone line to answer different phone numbers using
the Distinctive Ring Pattern Detection (DRPD). This selection is only available if
the “DRPD Mode” is set to recognize the ring patterns to automatically answer as
a fax call in the Fax Setup menu.
3. Fax Setup 4.Fax Feature 5.Advanced fax 6.Reports 8.Sound/Volume
Receive Mode
Ring to Answer
Contrast
Redial Term
Redials
MSG Confirm
Auto Report
Auto Reduction
Discard Size
Receive Code
DRPD Mode
Delay Fax
Priority Fax
Add Page
Cancel Job
Ignore Toner
Send Forward
RCV Forward
Toll Save
Junk Fax Setup
Secure Receive
Prefix Dial
Stamp RCV Name
Cover Page
ECM Mode
Phone Book
Sent Report
RCV Report
System Data
Scheduled Jobs
MSG Confirm
Junk Fax List
Speaker
Ringer
Key Sound
Alarm Sound