Dell V505 All In One Inkjet Printer - Manual (Page 18)

Wireless Networking
Minimum Requirements for Setup Configuring the Printer on a Wireless Network
Using Ad Hoc Connection
Wireless Network Settings Configuring the Printer on a Wireless Network
using Wi-Fi Protected Setup
Wireless Encryption Printing a Network Setup Page
Installing the Dell Internal Network Adapter 1150 Changing DHCP Settings
Configuring the Printer for an Ethernet Connection Changing Wireless Settings after Installation
Configuring the Printer on a Wireless Network Using a Temporary
USB Cable (recommended for most users)
You can configure the adapter on a wireless network by:
Using ad hoc connection (ad hoc profile must first be created before ad hoc connection can be established)
Using a temporary USB cable (recommended for most users)
Using the Wi-Fi Protected Setup (recommended for advanced users)
You can configure the adapter using the Wi-Fi Protected Setup in three ways:
Using the Wi-Fi Protected Setup PIN Method
Using the Wi-Fi Protected Setup Push Button on the Router's Web Page
Using the Wi-Fi Protected Setup Physical Push Button on the Router
Minimum Requirements for Setup
The Dell Internal Network Adapter 1150
The Dell All-In-One Printer
An existing wireless network
The Drivers and Utilities CD that shipped with your printer
A computer running one of the following operating systems:
Windows Vista™
Microsoft
®
Windows
®
XP
Microsoft Windows 2000
NOTE: The Dell™ Internal Network Adapter 1150 may not be available in all regions. Check with your local Dell Sales
Representative to determine availability.