Dell V505 All In One Inkjet Printer - Manual (Page 27)

14. Type the PIN provided on your printer operator panel into the PIN field on your router WPS page within two minutes.
Wait for configuration to complete.
If setup is successful
Wi-Fi Protected Setup Successful
appears on the printer operator panel.
Check if the printer's Wi-Fi LED turns blue. For more information, see Wi-Fi LED . Continue with step 15 .
If setup is unsuccessful or times out
Wait for a few minutes, and then perform step 9 to step 14 again.
15. Close the router WPS page.
16. Follow the instructions on the installation screen to complete setup.
Using the Wi-Fi Protected Setup Push Button on the Router's Web Page
1. If you are using your printer with a new Dell computer: Connect the USB cable between the port on the back of the
printer and the port on the back of the computer. Go to step 6 .
If you are using your printer with an existing computer: Go to the next step.
2. Ensure that your computer is on, and then insert the Drivers and Utilities CD.
3. From the Welcome screen, click Next.
4. Select I Agree to the terms of this license agreement, and then click Next.
5. From the Install Additional Software or Software Already Installed screen, click Next.