Dell Latitude 131L - Manual (Page 103)

Adding and Replacing Parts
103
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on
the card and on the system board, and realign the card.
5 Install the replacement Mini-Card:
a Insert the Mini-Card connector into the system board connector at a 45-degree angle, and then
press the other end of the Mini-Card down into the securing tabs until the card clicks into place.
1 Mini-Card 2 metal securing tab 3 metal securing tab
2
3
1
book.book Page 103 Wednesday, April 4, 2007 7:31 AM