Removing a media memory card – Dell Latitude 131L User Manual

Page 54

Advertising
background image

54

Using Cards

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product

Information Guide.

To install a media memory card:

1 Hold the card with the top side of the card facing up.
2 Slide the card into the slot until the card is completely seated in its connector.

If you encounter too much resistance, do not force the card. Check the card orientation and try again.

The computer recognizes the media memory card and automatically loads the appropriate device driver.
If the configuration program tells you to load the manufacturer's drivers, use the CD that came with the
media memory card, if applicable.

Removing a Media Memory Card

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product

Information Guide.

NOTICE:

Use the media memory card configuration utility (click the

icon in the taskbar) to select a card and

stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration
utility, you could lose data.

Press the card in to release it from the card reader so that it is partially ejected, and remove the card.

1

media memory card slot

2

media memory card

1

2

book.book Page 54 Wednesday, April 4, 2007 7:31 AM

Advertising