Ensuring sufficient power for your computer, Printer problems – Dell Latitude 131L User Manual

Page 77

Advertising
background image

Solving Problems

77

C

HECK

THE

A C

ADAPTER

Check the AC adapter cable connections. If the AC adapter has a light,

ensure that the light is on.

C

ONNECT

THE

COMPUTER

DIRECTLY

TO

AN

ELECTRICAL

OUTLET

Bypass power protection devices, power

strips, and the extension cable to verify that the computer turns on.

E

LIMINATE

POSSIBLE

INTERFERENCE

Turn off nearby fans, fluorescent lights, halogen lamps, or other

appliances.

A

DJUST

THE

POWER

PROPERTIES

See "Power Management Modes" on page 43.

R

ESEAT

THE

MEMORY

MODULES

If the computer power light turns on but the display remains blank,

reinstall the memory modules (see "Memory" on page 94).

Ensuring Sufficient Power for Your Computer

Your computer is designed to use the 65-W AC adapter; you may choose to use the optional 90-W AC
adapter for optimum system performance. Use of the 90-W AC adapter may decrease the length of time
required to fully recharge your computer battery.

Printer Problems

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product

Information Guide.

NOTE:

If you need technical assistance for your printer, contact the printer’s manufacturer.

E

NSURE

THAT

THE

PRINTER

IS

TURNED

ON

C

HECK

THE

PRINTER

CABLE

CONNECTIONS

See the printer documentation for cable connection information.

Ensure that the printer cables are securely connected to the printer and the computer.

T

EST

THE

ELECTRICAL

OUTLET

Ensure that the electrical outlet is working by testing it with another

device, such as a lamp.

V

ERIFY

THAT

THE

PRINTER

IS

RECOGNIZED

BY

W

INDOWS

1 Click the Start button, click Control Panel, and then click Printers and Other Hardware.
2 Click View installed printers or fax printers.

If the printer is listed, right-click the printer icon.

3 Click Properties and click the Ports tab. For a parallel printer, ensure that the Print to the following

port(s): setting is LPT1 (Printer Port). For a USB printer, ensure that the Print to the following
port(s): setting is USB.

R

EINSTALL

THE

PRINTER

DRIVER

See the printer documentation for instructions.

book.book Page 77 Wednesday, April 4, 2007 7:31 AM

Advertising