Troubleshooting a raid controller expansion card – Dell PowerEdge 1650 User Manual
Page 39
6.
Reseat the ROMB card in its socket (see "
Installing a ROMB Card
" in "Installing System Board Options").
See
Figure 6
-1
for the location of the ROMB card.
7.
Check that the back-up battery power cable is attached to the connector on the ROMB card.
8.
Close the system doors, reconnect the system to the electrical outlet, and reboot the system.
If the problem is not resolved, see "
Getting Help
" for instructions on obtaining technical assistance.
Troubleshooting a RAID Controller Expansion Card
Your system may contain an optional RAID controller expansion card. If you encounter problems with the controller, see the card's documentation for
information on troubleshooting.
Back to Contents Page
CAUTION:
See "Protecting Against Electrostatic Discharge" in the safety instructions in your System Information document.