Dell PowerEdge 1650 User Manual
Page 49
6.
Close the system doors.
7.
Reconnect the system and any attached peripherals to their electrical outlets, and turn them on.
8.
Enter the System Setup program to confirm that the battery is operating properly (see "Using the System Setup Program" in the User's Guide).
9.
Enter the correct time and date in the System Setup program's Time and Date settings.
10.
Re-enter any system configuration information that is no longer displayed on the System Setup screens, and then exit the System Setup program.
11.
To test the newly installed battery, power down and disconnect the system from its electrical source for at least an hour.
12.
After an hour, connect the system to its electrical source and turn on the power.
13.
Enter the System Setup program and if the time and date are still incorrect, see "
Getting Help
" for instructions on obtaining technical assistance.
Back to Contents Page