Dell PowerVault TL4000 - Manual (Page 115)

Important: Wait for the messages before you insert or remove cartridges to ensure
that the library is ready to handle the cartridges. After the I/O station
is closed, you must wait for the library to complete its inventory before
normal library operations commence.
Control: Move Cartridges
Use this menu item to move cartridges in the library.
To move a cartridge from point A to point B, you must make the following choices:
v Source Type - Drive, I/O station, magazine. Only the source type(s) that contain
cartridges will be listed.
v Source - the choices start with the choice made in the preceding item and then
advances through all available choices.
Note: If the Attention LED is ON due to a suspect cartridge, that cartridge will
be identified by an exclamation point (!) when scrolling through the
source cartridges.
v Volume Serial - the serial number of the cartridge
v Dest Type - the destination Drive, I/O station, magazine
v Dest - the choices start with the choice made in the preceding item and then
advances through all available choices.
Control: Magazine
Use this menu item to unlock the cartridge magazines.
Control
Move Cartridges
Source
Type
Volume
Serial
Destination
Type
Destination Source
a77ug053
Figure 5-10. Control: Move Cartridges menu
Chapter 5. Operations 5-17