Dell PowerVault TL4000 - Manual (Page 152)

change a password, or a restore factory default password from the
operator panel (if the admin account is the one that is locked out).
v Maximum Number Of Days Before Password Must Be Changed - Choose the
maximum number of days before the password must be changed. The factory
default value is 90. Possible range for this configuration option is 0 - 365. There
is no limitation if 0 is selected.
Click one:
v Refresh - Cancels the changes that are made to the screen.
v Submit - Applies the changes that are made to the screen.
Configure Library: Date & Time
This page allows the user to set the time and date, and how it will be displayed.
Time (24H)
Using a 24-hour format, enter the current hour, minutes, and seconds.
Date Enter the current month, day, and year.
Click one of the following:
v Refresh - to cancel the changes made to the screen.
v Submit - to apply the changes made to the screen.
Configure Library: Logs & Traces
This page allows service personnel to set the error log mode to Continuous or to
Stop trace at first error
.
a77ug0
61
Figure 5-46. The Configure Library: Date & Time page
5-54 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide