Dell PowerVault TL4000 - Manual (Page 77)

3. When the login screen appears,
a.
Select admin for a User ID.
b. Enter secure for a Password.
Verifying/Updating Firmware
It is important to run the latest level of firmware. To ensure that you are running
the latest levels of library firmware, drive firmware, and SNMP MIB (Management
Information Base) file, complete this procedure.
1.
Verify the SNMP MIB file currently installed on your SNMP server. Verify the
levels of library and drive firmware currently installed on your library by
completing the following steps:
a.
Expand Monitor Library in the left navigation pane of the Web User
Interface.
b. Click Library Identity and make note of the Firmware revision.
c. Click Drive Identity and make note of the Firmware revision.
d. Log out of the Web User Interface.
Note: The SNMP MIB file is an optional feature.
2. Download the latest library firmware, drive firmware, and SNMP MIB
(Management Information Base) file from http://support.dell.com.
Note: The SNMP MIB file is an optional feature.
a. Enter in your internet browser address field and press Enter on your
keyboard.
b. Compare the firmware level available on the web to those that you made
note of in step 1. If you are running the latest levels of library and drive
firmware, proceed to the next step. If you are not running the latest levels
of library and drive firmware, download the firmware that needs to be
updated to your library host.
3. Update library and drive firmware on your library, if necessary.
a.
Enter the IP Address of your library in your internet browser address field
and press Enter on your keyboard.
b. Log in to your library's Web User Interface.
c. Expand Service Library in the left navigation pane of the Web User
Interface.
d. Click Upgrade Firmware.
e. Browse to the new firmware level on your host, then click Update. Do this
for both library and drive firmware, if necessary.
a77ug070
Figure 4-23. Log in screen on the Web User Interface
Chapter 4. Installation and Configuration 4-23