Desktop cleanup wizard, Internet connection firewall, Setting up a home and office network – Dell Precision 690 User Manual

Page 166: Connecting to a network adapter

Advertising
background image

 

Desktop Cleanup Wizard

Your computer is set up to use the Desktop Cleanup Wizard to move programs that are not frequently used to a designated folder 7 days after you first start
your computer and every 60 days after that. The appearance of the Start menu changes as programs are moved.

To turn off the Desktop Cleanup Wizard, perform the following steps.

 

1.

Right-click an empty spot on the desktop and click Properties.

 

2.

Click the Desktop tab and click Customize Desktop.

 

3.

Click Run Desktop Cleanup Wizard every 60 days to remove the check mark.

 

4.

Click OK.

To run the Desktop Cleanup Wizard at any time:

 

1.

Right-click an empty spot on the desktop and click Properties.

 

2.

Click the Desktop tab and click Customize Desktop.

 

3.

Click Clean Desktop Now.

 

4.

When the Desktop Cleanup Wizard appears, click Next.

 

5.

In the list of shortcuts, deselect any shortcuts you want to leave on the desktop and click Next.

 

6.

Click Finish to remove the shortcuts and close the wizard.

 

Internet Connection Firewall

The Internet Connection Firewall provides basic protection from unauthorized access to the computer while the computer is connected to the Internet. When
the firewall is enabled for a network connection, the firewall icon appears with a red background in the Network Connections section of the Control Panel.

Note that enabling the Internet Connection Firewall does not reduce the need for virus-checking software.

For more information, see the

Finding Information

.

 

Setting Up a Home and Office Network

 

Connecting to a Network Adapter

Before you connect your computer to a network, the computer must have a network adapter installed and a network cable connected to it.

To connect a network cable:

 

1.

Connect the network cable to the network adapter connector on the back of your computer.

Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.

 

2.

Connect the other end of the network cable to a network device.

NOTE:

You can run the Desktop Cleanup Wizard any time by clicking Clean Desktop Now under Run Desktop Cleanup Wizard every 60 days.

NOTE:

Plug the network cable into the network adapter connector on the computer. Do not plug the network cable into the modem connector on the

computer. Do not plug a network cable into a telephone wall jack.

Advertising