Cards, Expansion card support, Installing an expansion card – Dell Precision 690 User Manual

Page 30

Advertising
background image

Back to Contents Page

 

Cards

Dell Precision™ Workstation 690 User's Guide

  

Expansion Card Support

  

Installing an Expansion Card

  

Removing an Expansion Card

  

Removing a PCI Express Graphics Card from a Dual Configuration

  

Installing PCI Express Graphics Cards in a Dual Configuration

  

Removing the Optional Graphics Riser Card

  

Replacing the Optional Graphics Riser Card


 

 

 

Expansion Card Support

In a configuration without dual graphics and the associated graphics riser card: Your Dell™ computer provides the following slots for PCI and PCI Express 
cards:

l

 

One PCI card slot

l

 

One PCI Express x16 card slot

l

 

Three PCI Express x8 card slots (wired as x4)

l

 

Two PCI-X card slots

In a configuration with dual graphics and the associated graphics riser card: Your Dell™ computer provides the following slots for PCI and PCI Express 
cards:

l

 

Two PCI Express x16 card slots (reserved for dual-graphics cards)

l

 

One PCI Express x8 card slot (wired as x4)

l

 

Two PCI-X card slots

If you are installing or replacing a PCI, PCI Express, or PCI-X card, see

Installing an Expansion Card

. If you are removing but not replacing a PCI, PCI Express,

or PCI-X card, see

Removing an Expansion Card

.

Before installing a card, see the documentation that came with the card for information on configuring the card, making internal connections, or otherwise
customizing it for your computer. If you are replacing a card, uninstall the existing driver for the card.

 

Installing an Expansion Card

 

1.

Follow the procedures in

Before You Begin

.

 

 

 

2.

Remove the computer cover (see

Removing the Computer Cover

).


 

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

NOTICE:

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your

computer's electronic components. You can do so by touching an unpainted metal surface on the computer.

NOTE:

To upgrade to or downgrade from a dual-graphics configuration (with the graphics riser card), you will need additional parts that can be ordered

from Dell. See

Contacting Dell

.

CAUTION:

Your computer is heavy (it has an approximate minimum weight of 55 lbs) and can be difficult to maneuver. Seek assistance before

attempting to lift, move, or tilt it; this computer requires a two-man lift. Always lift correctly to avoid injury; avoid bending over while lifting. See
your Product Information Guide
for other important safety information.

CAUTION:

The computer stand should be installed at all times to ensure maximum system stability. Failure to install the stand could result in the

computer tipping over, potentially resulting in bodily injury or damage to the computer.

Advertising