Cd/dvd drive, Removing a cd/dvd drive – Dell Precision 690 User Manual
Page 73
10.
Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
11.
Reinstall the drive panel (see
12.
Replace the computer cover (see
Replacing the Computer Cover
).
13.
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
14.
Enter system setup and select the appropriate USB for FlexBay option (see
System Setup
).
15.
Verify that your computer works correctly by running the Dell Diagnostics. See
Dell Diagnostics
.
CD/DVD Drive
Removing a CD/DVD Drive
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Remove the drive panel (see
).
1 interface cable
2 Media Card Reader connector (USB)
NOTICE:
To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer.
CAUTION:
Your computer is heavy (it has an approximate minimum weight of 55 lbs) and can be difficult to maneuver. Seek assistance before
attempting to lift, move, or tilt it; this computer requires a two-man lift. Always lift correctly to avoid injury; avoid bending over while lifting. See
your Product Information Guide for other important safety information.
CAUTION:
The computer stand should be installed at all times to ensure maximum system stability. Failure to install the stand could result in the
computer tipping over, potentially resulting in bodily injury or damage to the computer.