Copying cds and dvds, How to copy a cd or dvd, Using blank cds and dvds – Dell Precision 690 User Manual

Page 45

Advertising
background image

Back to Contents Page

 

Copying CDs and DVDs

Dell Precision™ Workstation 690 User's Guide

This section applies only to computers that have a CD-RW, DVD+/-RW, or CD-RW/DVD (combo) drive.

The following instructions explain how to make an exact copy of a CD or DVD. You can also use Sonic DigitalMedia for other purposes, such as creating music
CDs from audio files stored on your computer or backing up important data. For help, open Sonic DigitalMedia and then click the question mark icon in the
upper-right corner of the window.

 

How to Copy a CD or DVD

The DVD-writable drives installed in Dell™ computers can write to and read DVD+/-R, DVD+/-RW and DVD+R DL (dual layer) media, but cannot write to and may
not read DVD-RAM or DVD-R DL media.

 

1.

Click the Start button, point to All Programs® Sonic®

DigitalMedia Projects, and then click

Copy.


 

2.

Under the Copy tab, click Disc Copy.

 

3.

To copy the CD or DVD:

l

 

If you have one CD or DVD drive, ensure that the settings are correct and click the Disc Copy button. The computer reads your source CD or DVD

and copies the data to a temporary folder on your computer hard drive.

When prompted, insert a blank CD or DVD into the drive and click OK.

l

 

If you have two CD or DVD drives, select the drive into which you have inserted your source CD or DVD and click the Disc Copy button. The

computer copies the data from the source CD or DVD to the blank CD or DVD.

Once you have finished copying the source CD or DVD, the CD or DVD that you have created automatically ejects.

 

Using Blank CDs and DVDs

CD-RW drives can write to CD recording media only (including high-speed CD-RW) while DVD-writable drives can write to both CD and DVD recording media.

Use blank CD-Rs to record music or permanently store data files. After creating a CD-R, you cannot write to that CD-R again (see the Sonic documentation for
more information). Use blank CD-RWs to write to CDs or to erase, rewrite, or update data on CDs.

Blank DVD+/-Rs can be used to permanently store large amounts of information. After you create a DVD+/-R disc, you may not be able to write to that disc
again if the disc is "finalized" or "closed" during the final stage of the disc creation process. Use blank DVD+/-RWs if you plan to erase, rewrite, or update
information on that disc later.

 

CD-Writable Drives

 

DVD-Writable Drives

NOTE:

Ensure that you observe all copyright laws when creating CDs or DVDs.

NOTE:

The types of CD or DVD drives offered by Dell may vary by country.

NOTE:

CD-RW/DVD combo drives cannot write to DVD media. If you have a CD-RW/DVD combo drive and you experience recording problems, check for

available software patches on the Sonic support website at www.sonic.com.

NOTE:

Most commercial DVDs have copyright protection and cannot be copied using Sonic DigitalMedia.

 

Media Type

 

Read

 

Write

 

Rewritable

CD-R

Yes

Yes

No

CD-RW

Yes

Yes

Yes

 

Media Type

 

Read

 

Write

 

Rewritable

CD-R

Yes

Yes

No

CD-RW

Yes

Yes

Yes

DVD+R

Yes

Yes

No

DVD-R

Yes

Yes

No

Advertising