Dell UPS 4200R - Manual (Page 24)

Configuration 25
Figure 6. Auto Discovery Method Buttons
The following operation notes apply when discovering nodes:
• The “Quick Scan” request is a Broadcast frame on 4679 IANA reserved port and 69 standard TFTP
port. Using the “Quick Scan” operation, you will discover through broadcast within a few seconds
following Web/SNMP cards.
• For the nodes outside of the network segment, perform the discovery based on IP address ranges using
the “Range Scan” option. Using the “Range Scan” operation you will discover the nodes that are
outside of the Network segment and nodes that are not compatible with the “Quick Scan” feature.
• “Address Scan” performs a single address scan (or several IP addresses separated by the ';'character)
Configure Actions
You can define the way users will be notified when node events happen.
From the Settings > Actions menu item selection, the Actions page displays. The following buttons are
provided (see Figure 7):
• Create a new action
• Copy selected action
• Edit selected action
• Test selected action
• Remove selected action
0119_2-Dell MUMC UG.book Page 25 Saturday, November 2, 2013 4:59 PM